Agilent 33120A User's Guide

Chapter 3 Features and FunctionsArbitrary Waveforms¿19 Move down a level to save the waveform in non-volatile memory.At this point, the pulse waveform is being output from volatile memory.You can store up to four user-defined waveforms in non-volatile memory.From the front panel, you can save the waveform using one of thefollowing names: ARB1, ARB2, ARB3, or ARB4.ARB1 *NEW*Enter20 Save the waveform and turn off the menu.The function generator beeps and displays a message to show that thewaveform is being saved. You are then exited from the menu.3SAVINGThe waveform is now stored in non-volatile memory and is outputfrom the function generator. The name that you used to store thewaveform should appear in the waveform list (press Arb List ).107