Agilent 33120A User's Guide

Chapter 4 Remote Interface ReferenceThe SCPI Status RegistersThe Standard Event register is cleared when:œ You execute the *CLS (clear status) command.œ You query the event register using the *ESR? (event status register)command.The Standard Event enable register is cleared when:œ You execute the *ESE 0 command.œ You turn on the power and have previously configured the functiongenerator using the *PSC 1 command.œ The enable register will not be cleared at power-on if you havepreviously configured the function generator using *PSC 0.208