Agilent 33120A User's Guide

Chapter 1 Quick StartTo store the instrument stateTo verify that the state was stored properly, you can turn the power offbefore recalling the state.Recall5 Recall the stored instrument state.To recall the stored state, you must use the same memory location usedpreviously to store the state. Use the up and down arrow keys to changethe displayed storage location.RECALL 2To cancel the restore operation, press Recall again.This message appears on the display for approximately 10 seconds.Repeat this step as needed.Enter6 Restore the instrument state.The function generator should now be configured in the same state aswhen you stored the setup on the previous page.When power is turned off, the function generator automatically storesits state in memory location “0”. You can recall the power-down state,but you cannot store the state to location “0” from the front panel.Use the POWER ON LAST STATE command in the SYS MENU toautomatically recall the power-down state when power is turned on.See chapter 2 for more information on using the front-panel menus.26