Agilent 33120A User's Guide

Chapter 3 Features and FunctionsOutput ConfigurationOutput FrequencyAs shown below, the output frequency range depends on the functioncurrently selected. The default frequency is 1 kHz for all functions.FunctionMinimum FrequencyMaximum FrequencySineSquareTriangleRampBuilt-In Arbs 1100 mHz100 mHz100 mHz100 mHz100 mHz15 MHz15 MHz100 kHz100 kHz5 MHz1 There are five built-in arbitrary waveforms stored in non-volatile memory:sinc, negative ramp, exponential rise, exponential fall, and cardiac.3For arbitrary waveforms that you create and download to memory,the maximum frequency depends on the number of points specified inthe waveform. As shown below, the maximum output frequencydecreases as you specify more points in the waveform. The five built-inarbitrary waveforms can be output at a maximum of 5 MHz.Number of Arb Points8 to 8,192 (8k)8,193 to 12,287 (12k)12,288 to 16,000Minimum Frequency100 mHz100 mHz100 mHzMaximum Frequency5 MHz2.5 MHz200 kHz57