Agilent 33120A User's Guide

Chapter 2 Front-Panel Menu OperationA front-panel menu tutorial¿5 Move down a level to the “PARAMETER” choices.The first parameter choice is “DEFAULT” for the POWER ON command(“DEFAULT” is the factory setting and is stored in non-volatile memory).DEFAULT>6 Move across to the “LAST STATE” choice.There are two parameter choices for POWER ON.1LAST STATEEnter7 Save the change and turn off the menu.The function generator beeps and displays a message to show that thechange is now in effect. You are then exited from the menu.ENTERED8 Cycle the power to restore the default values.Turn the function generator OFF and then ON. The default outputstate will now be in effect (1 kHz sine wave, 100 mV peak-to-peak,50W termination).1 You can also use the knob to scroll left or right through the choices on eachlevel of the menu.36