Agilent 33120A User's Guide

Chapter 5 Error MessagesExecution Errors-151 Invalid string dataAn invalid character string was received. Check to see if you haveenclosed the character string in single or double quotes and that thestring contains valid ASCII characters.-158 String data not allowedA character string was received but is not allowed for the command.Check the list of parameters to verify that you have used a validparameter type. Example: BMOD:NCYC ’TEN’-161 Invalid block dataApplies only to the DATA:DAC VOLATILE command. For a definitelengthblock, the number of bytes of data sent does not match thenumber of bytes that you specified in the block header. For anindefinite-length block, an EOI (End-or-Identify) was received withoutan accompanying character.-168 Block data not allowedBlock data was received but is not allowed for the command. Check tosee if you have sent the correct data type with the command.-170 to -178 Expression errorsThe function generator does not accept mathematical expressions.-211 Trigger ignoredA Group Execute Trigger (GET) or *TRG was received but the triggerwas ignored. Make sure that you have selected the correct trigger source.5231