Agilent 33120A User's Guide

Chapter 2 Front-Panel Menu OperationA front-panel menu tutorialMessages Displayed During Menu UseTOP OF MENU You pressed ¾ while on the “MENUS” level; this is the top level of themenu and you cannot go any higher.To turn off the menu, press Shift Menu On/Off . To move across the choiceson a level, press < or . To move down a level, press .> ¿MENUS You are on the “MENUS” level. Press < or > to view the choices.COMMANDS You are on the “COMMANDS” level. Press < or > to view the commandchoices within the selected menu group.PARAMETER You are on the “PARAMETER” level. Press < or > to view and edit theparameter for the selected command.MENU BOTTOM You pressed ¿ while on the “PARAMETER” level; this is the bottomlevel of the menu and you cannot go any lower.To turn off the menu, press Shift Menu On/Off . To move up a level, press ¾ .ENTERED The change made on the “PARAMETER” level is saved. This is displayed afteryou press Enter (Menu Enter) to execute the command.MIN VALUE The value you specified on the “PARAMETER” level is too small for theselected command. The minimum value allowed is displayed for you to edit.MAX VALUE The value you specified on the “PARAMETER” level is too large for theselected command. The maximum value allowed is displayed for you to edit.EXITING You will see this message if you turn off the menu by pressingShift Menu On/Off or Shift Cancel . You did not edit any values on the“PARAMETER” level and changes were NOT saved.NOT ENTERED You will see this message if you turn off the menu by pressingShift Menu On/Off or Shift Cancel . You did some editing of parameters but thechanges were NOT saved. Press the Enter key (Menu Enter) to save changesmade on the “PARAMETER” level.34