ECOPROBE 5 - rs dynamics
ECOPROBE 5 - rs dynamics
ECOPROBE 5 - rs dynamics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1. INSTRUMENT DESCRIPTION<br />
Fig. 8 - Display panel and<br />
handle controls<br />
A<br />
Fig. 9 - The front of the instrument<br />
INSTRUMENT DESCRIPTION<br />
C<br />
B<br />
1.1 BASIC CONTROLS (Fig. 8)<br />
Display Panel -- Four Keys Arranged in Two<br />
Islands<br />
ON/OFF Switches the instrument On/Off.<br />
LIGHT While holding down the key, ◄/► is<br />
used to switch the screen back light On/Off;<br />
▲/▼ is used to change the screen<br />
contrast.<br />
ESC Terminates a current operation and returns<br />
to the Main Menu.<br />
RUN Starts measuring the station with the<br />
displayed coordinates.<br />
Handle Control -- Four Arrowed Keys<br />
These are multi-functional switches and their actual<br />
operation or function depends on the specific menu<br />
displayed.<br />
▲/▼ (Up/Down) Moves the cu<strong>rs</strong>or up/down through a<br />
menu.<br />
◄ (Left) Escapes from a current menu to return<br />
to the previous level and saves a<br />
selected option.<br />
► (Right) Selects an option from a menu, or<br />
initiates a procedure/operation.<br />
13<br />
1.2 The Front of the Instrument<br />
(Fig. 9)<br />
A. Multifunctional connector for the charger,<br />
PC, GPS receiver and alternative power<br />
source like solar batteries or a car<br />
charging cable.<br />
B. Gas inlet<br />
C. Gas outlet<br />
Do not allow any liquid to enter the sampling aperture. The resulting serious damage<br />
to the analytical units is not covered by the warranty!