ECOPROBE 5 - rs dynamics

Recommendations

Info

6. DELETING A LOCALITY FROM ECOPROBE 5 If a locality is not required any longer, download the data to the computer and delete the locality in ECOPROBE 5 to create space on the instrument disk. To delete a locality, select LOCALITY MANAGEMENT from the Main Menu (Window W.2) and window W.4 will appear. ************ MAIN MENU *************** LOCALITY 1 LOCALITY 2 LOCALITY MANAGEMENT CONTINUOUS MEASUREM. MONITOR COMMUNICATION SYSTEM CONFIGURATION CALIBRATION W.2 - Main Menu DELETING A LOCALITY FROM ECOPROBE 5 41 Open LOCALITY 1 Open LOCALITY 2 Open MONITOR Delete Locality W.4 -Locality Item Delete Locality provides a way to delete localities in the instrument. Select the item and follow the instructions on the screen.
7. CONTINUOUS MEASUREMENT ECOPROBE 5 OTHER FEATURES Allows continuous operation without any data being logged which gives you fast screening for a gas leak at the surveyed area. • To start, select the item CONTINUOUS MEASUREMENT in the Main Menu (Window W.2). • Window W.21 will be opened offering an option START and displaying a default Configuration File that can be changed to the operator’s specifications. CONTINUOUS CONFIG. START Group Measurement: No Pump Speed: 1.25 l/min Sampl. Interval: 0.1 s Reset period: AUTs Preint.period: 5 s Integr. period: 20 s Probe Depth: 0.50 m Save Curr. Val.: No Temperature: 99 grad PID On/Off: On Calibration gas: Isobutene W. 21 - Continuous Measurement Menu • Press START for resetting. • When displayed, confirm Press -> with right handle arrow. • Continuous measurement will start after a short pre-integration period. • Press ESC to stop measuring at any time and to return to the Main Menu. The instrument switches itself off after 15 minutes of operation in the Continuous mode as the analytical units may become slightly unstable and need to be reset. To continue measuring it is necessary to start Continuous Measurement again. The measuring cycle starts with resetting which allows the analytical units to stabilize themselves for the next 15 minutes of operation. Note: After the instrument has been switched off in the field, the IR unit needs to be stabilized. It is recommended to measure two “blind” stations (set up “Test locality” in the instrument for making various test measurements) or use CONTINUOUS MEASUREMENT mode for about one minute before starting to measure again. The operator can thus avoid incorrect readings at the first measured station. 42
Page 1 and 2: ECOPROBE 5 RS DYNAMICS Operator’s
Page 3 and 4: 11. CALIBRATION 47 11.1 ECOPROBE 5
Page 6 and 7: The main applications of ECOPROBE 5
Page 8 and 9: INTRODUCTION INTERNET COMMUNICATION
Page 10 and 11: THE FIELD SURVEY What Do You Need f
Page 12 and 13: SOIL VAPOR SURVEY INTRODUCTION The
Page 14 and 15: 1. INSTRUMENT DESCRIPTION Fig. 8 -
Page 16 and 17: 2.1 MAIN MENU (Window W. 2) - BRIEF
Page 18 and 19: SETTING ECOPROBE 5 BEFORE STARTING
Page 20 and 21: 3.2 GRID Standard This parameter al
Page 22 and 23: SETTING UP ECOPROBE 5 BEFORE STARTI
Page 24 and 25: 3.7 PROBE DEPTH The depth of the ho
Page 26 and 27: 3.11 SUMMARY SETTING UP ECOPROBE 5
Page 28 and 29: MEASURING - STANDARD GRID • Make
Page 30 and 31: • After the station has been meas
Page 32 and 33: B. Second option: Entering Coordina
Page 34 and 35: • Although there is a water valve
Page 36 and 37: ECOPROBE 5 and GPS ECOPROBE 5 is th
Page 38 and 39: CONFIGURING GPS LOCALITY IN ECOPROB
Page 40 and 41: 2. Coordinates, time and number of
Page 44 and 45: 8. MONITORING ECOPROBE 5 can be use
Page 46 and 47: 9. COMMUNICATION This mode is used
Page 48 and 49: 11. CALIBRATION CALIBRATION The ECO
Page 50 and 51: Calibration interval depends on the
Page 52 and 53: ECOPROBE 5 may display for instance
Page 54 and 55: � Pressing the right arrow will s
Page 56 and 57: CALIBRATION 11.5 CALIBRATION OF THE
Page 58 and 59: ECOPROBE 5 ANALYTICAL SYSTEMS PID A
Page 60 and 61: PID detection generally requires a
Page 62 and 63: Table of Measured Compounds Compoun
Page 64 and 65: TABLE OF MEASURED COMPOUNDS Compoun
Page 66 and 67: TABLE OF MEASURED COMPOUNDS Compoun
Page 68 and 69: Response of ECOPROBE 5 PID unit, in
Page 70 and 71: 13. IR ANALYZER IR ANALYZER • Inf
Page 72 and 73: HOW CAN WE UNDERSTAND AND INTERPRET
Page 74 and 75: CASE STUDY 2 (Fig. 27) The study si
Page 76 and 77: 15. GENERAL 15.1 POWER SUPPLY Use t
Page 78 and 79: Notes: ECOPROBE 5 77

ECOPROBE 5 - rs dynamics

Create successful ePaper yourself

Delete template?

Save as template?