ECOPROBE 5 - rs dynamics

Recommendations

Info

The main applications of ECOPROBE 5 are fast mapping, monitoring and delineating contaminated areas, and identifying the contaminant sources and migration paths. Measuring by means of ECOPROBE 5 is fast and economical and eliminates the expensive laboratory analysis of spectrally known and identical samples. As many as one hundred stations can be measured in a day. Resulting contour or wire-frame maps take only minutes to construct using advanced ECOPROBE 5 data logging system in combination with ECOPROBE_VIEW communication software and graphic software Surfer for Windows. ECOPROBE 5 measures the concentration of a contaminant vapor phase in a subsurface soil environment. These values are proportional to the contaminant concentration but cannot exactly define the precise amount of liquid contaminant present in the soil. Once the impacted area is surveyed, it is recommended that a sample be taken where the highest contamination was recorded and also several samples from the boundary of the contaminated area (Fig.1) for a laboratory analysis to determine the concentration range of the contaminant. Fig. 1 - Five samples for laboratory investigation were taken from the above area where 250 stations were measured using ECOPROBE 5 for fast surveying of the contaminated site. 5
ECOPROBE 5 introduces a new level of flexibility, convenience, and quality to in situ detection and analysis of the vapor phase of volatile organic compounds. ECOPROBE 5 comprises two independent analytical systems: 1. Photo-ionization analyzer (PID) measuring total concentration of volatile organic compounds (VOC) 2. Infra-red analyzer (IR) providing separate measurements of methane, petroleum group of hydrocarbons and carbon dioxide. In addition to the above parameters, temperature, pressure and oxygen are also measured. PID + IR INTRODUCTION 6 Fig.2 - ECOPROBE 5 Principle: soil gas is drawn into the probe and continuously analyzed in the instrument. This ideal combination of analytical systems provides a set of high precision data measured simultaneously in the subsurface environment and designed especially for cost effective soil contaminant surveys and various other environmental tasks.
Page 1 and 2: ECOPROBE 5 RS DYNAMICS Operator’s
Page 3 and 4: 11. CALIBRATION 47 11.1 ECOPROBE 5
Page 8 and 9: INTRODUCTION INTERNET COMMUNICATION
Page 10 and 11: THE FIELD SURVEY What Do You Need f
Page 12 and 13: SOIL VAPOR SURVEY INTRODUCTION The
Page 14 and 15: 1. INSTRUMENT DESCRIPTION Fig. 8 -
Page 16 and 17: 2.1 MAIN MENU (Window W. 2) - BRIEF
Page 18 and 19: SETTING ECOPROBE 5 BEFORE STARTING
Page 20 and 21: 3.2 GRID Standard This parameter al
Page 22 and 23: SETTING UP ECOPROBE 5 BEFORE STARTI
Page 24 and 25: 3.7 PROBE DEPTH The depth of the ho
Page 26 and 27: 3.11 SUMMARY SETTING UP ECOPROBE 5
Page 28 and 29: MEASURING - STANDARD GRID • Make
Page 30 and 31: • After the station has been meas
Page 32 and 33: B. Second option: Entering Coordina
Page 34 and 35: • Although there is a water valve
Page 36 and 37: ECOPROBE 5 and GPS ECOPROBE 5 is th
Page 38 and 39: CONFIGURING GPS LOCALITY IN ECOPROB
Page 40 and 41: 2. Coordinates, time and number of
Page 42 and 43: 6. DELETING A LOCALITY FROM ECOPROB
Page 44 and 45: 8. MONITORING ECOPROBE 5 can be use
Page 46 and 47: 9. COMMUNICATION This mode is used
Page 48 and 49: 11. CALIBRATION CALIBRATION The ECO
Page 50 and 51: Calibration interval depends on the
Page 52 and 53: ECOPROBE 5 may display for instance
Page 54 and 55: � Pressing the right arrow will s
Page 56 and 57:
CALIBRATION 11.5 CALIBRATION OF THE
Page 58 and 59:
ECOPROBE 5 ANALYTICAL SYSTEMS PID A
Page 60 and 61:
PID detection generally requires a
Page 62 and 63:
Table of Measured Compounds Compoun
Page 64 and 65:
TABLE OF MEASURED COMPOUNDS Compoun
Page 66 and 67:
TABLE OF MEASURED COMPOUNDS Compoun
Page 68 and 69:
Response of ECOPROBE 5 PID unit, in
Page 70 and 71:
13. IR ANALYZER IR ANALYZER • Inf
Page 72 and 73:
HOW CAN WE UNDERSTAND AND INTERPRET
Page 74 and 75:
CASE STUDY 2 (Fig. 27) The study si
Page 76 and 77:
15. GENERAL 15.1 POWER SUPPLY Use t
Page 78 and 79:
Notes: ECOPROBE 5 77
show all

ECOPROBE 5 - rs dynamics

Create successful ePaper yourself

Delete template?

Save as template?