ECOPROBE 5 - rs dynamics

4. MEASURING – STANDARD GRID
4.1 MEASURING IN THE FIELD
Now we can initiate the actual measuring procedure.
After setting the parameters and returning to the Main Menu the name of the locality is displayed after
LOCALITY 1 – in our case ABC (Window W. 9.2).
Description of the Measuring Mode
(Standard data Logging)
Name of Locality
“X” coordinate
of the measured station
Oxygen concentration
Absolute ambient
pressure/vacuum during
sampling
Number of calibration gas (in
this case - 118 - Isobutene);
Place for resulting PID
concentration, units -- ppm
for STANDARD mode, ppb
for HI SENS mode and for IR
resulting concentration.
MEASURING – STANDARD GRID
*********** MAIN MENU **************
LOCALITY 1 ABC
LOCALITY 2
LOCALITY MANAGEMENT
CONTINUOUS MEASUREM.
MONITOR
COMMUNICATION
SYSTEM CONFIGURATION
CALIBRATION
*********************************
W. 9.2 – Main Menu.
Select LOCALITY 1 ABC to open its measuring mode (Window W. 10.1).
Soil temperature (if sampling probe
with thermometer is connected)
ABC Inc: 10.0
X: 0.0 Y: 0.0
O 2 : --.- % T: --.-
P:
PID 118
---ppm
Meth
---ppm
T.P.
---ppm
CO 2
---ppm
W. 10.1 – Measuring Mode
26
“Y” increment.
“Y” coordinate of the
measured station
Coarse of measurement
from the PID and IR
analyzer:
methane channel
Total Petroleum channel
CO 2 channel.