ECOPROBE 5 - rs dynamics

2.1 MAIN MENU (Window W. 2) – BRIEF DESCRIPTION
LOCALITY 1 (or 2)
After selecting a new locality by using the Locality
Management option, this item opens a measuring
mode to start measurement of the locality.
LOCALITY MANAGEMENT
Enables you to set and delete localities and
monitoring stations.
CONTINUOUS MEASUREMENT
Allows continuous measurement without any data
being logged.
MONITOR
Enables automatic monitoring of contamination at a
predetermined sampling rate.
COMMUNICATION
Enables transferring data from ECOPROBE 5 to a
PC or notebook.
SYSTEM CONFIGURATION
Allows editing the default values of the Configuration File.
15
************ MAIN MENU ***************
LOCALITY 1
LOCALITY 2
LOCALITY MANAGEMENT
CONTINUOUS MEASUREM.
MONITOR
COMMUNICATION
SYSTEM CONFIGURATION
CALIBRATION
W. 2 - Main Menu
CALIBRATION
Enables you to perform a Single Point Calibration. This item is part of the calibration procedure.
Each item of the Main Menu contains sub-menus.
Use ▲/▼to scroll through the menu, and ► to access a selected item.
In the following Chapters the options LOCALITY MANAGEMENTS and LOCALITY 1 (or 2) are described.
These options are related to the setting the instrument before measuring and to the real measurement with
ECOPROBE 5. The other options of the Main Menu are described on p. 42.
Locality and Station (Fig.10)
What do the terms Locality and Station mean?
The term Locality means the entire
investigated area/site.
The term Station means a point within
the given Locality, where a
measurement is taken.
STARTING ECOPROBE 5
-
-
Contamination