Cisco IOS Wide-Area Networking Configuration Guide - Free Books

Frame Relay 64-Bit CountersFeature HistoryReleaseModification12.0(17)SThis feature was introduced on the Cisco 12000 series.12.2(4)TThis feature was integrated into Cisco IOS Release 12.2(4)T.12.2(4)T3Support for the Cisco 7500 series routers was added.12.0(21)SThe frame-relay ifmib-counter64 command was introduced.12.3(10) The frame-relay ifmib-counter64 command was integrated intoCisco IOS Release 12.3(10).12.3(11)TThe frame-relay ifmib-counter64 command was integrated intoCisco IOS Release 12.3(11)T.12.2(18)SXEThe frame-relay ifmib-counter64 command was integrated intoCisco IOS Release 12.2(18)SXE.This document describes the Frame Relay 64-Bit Counters feature in Cisco IOS Release 12.2(4)T. Itincludes the following sections:• Feature Overview, page 2• Supported Platforms, page 2• Supported Standards, MIBs, and RFCs, page 3• Prerequisites, page 3• Configuration Tasks, page 3• Monitoring and Maintaining Frame Relay 64-Bit Counters, page 4• Configuration Examples, page 4• Command Reference, page 8Americas Headquarters:Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA© 2007 Cisco Systems, Inc. All rights reserved.