Cisco IOS Wide-Area Networking Configuration Guide - Free Books

How to Configure Frame Relay Voice-Adaptive Traffic Shaping and FragmentationFrame Relay Voice-Adaptive Traffic Shaping and FragmentationStep 8Step 9Command or Actionclass nameExample:Router(config-fr-dlci)#endPurposeAssociates a map class with a specified data-linkconnection identifier (DLCI).• Use this command to assign the map class that wasconfigured with Frame Relay voice-adaptive trafficshaping to the PVC.Exits to privileged EXEC mode.Step 10Example:Router(config-fr-dlci)# endVerifying Frame Relay Voice-Adaptive Traffic Shaping and FragmentationSUMMARY STEPSDETAILED STEPSPerform this task to verify the configuration and operation of Frame Relay voice-adaptive traffic shapingand fragmentation.1. enable2. show policy-map [policy-map]3. show policy-map interface interface-name [dlci dlci] [input | output]4. show frame-relay pvc [interface interface] [dlci] [64-bit]Step 1Step 2Command or ActionenableExample:Router> enableshow policy-map [policy-map]Example:Router# show policy-mapPurposeEnables privileged EXEC mode.• Enter your password if prompted.Displays the configuration of all classes for a specifiedservice policy map or all classes for all existing policymaps.10