Cisco IOS Wide-Area Networking Configuration Guide - Free Books

Using the Command-Line Interface in Cisco IOS and Cisco IOS XE SoftwareUsing the CLITable 1CLI Command ModesCommand Access Method Prompt Exit Method Mode UsageModeUser EXEC Log in. Router> Issue the logout or exitcommand.• Change terminalsettings.PrivilegedEXECGlobalconfigurationInterfaceconfigurationLineconfigurationFrom user EXEC mode,issue the enablecommand.From privileged EXECmode, issue theconfigure terminalcommand.From globalconfiguration mode,issue the interfacecommand.From globalconfiguration mode,issue the line vty or lineconsole command.Router#Router(config)#Router(config-if)#Router(config-line)#Issue the disablecommand or the exitcommand to return touser EXEC mode.Issue the exit commandor the end command toreturn to privilegedEXEC mode.Issue the exit commandto return to globalconfiguration mode orthe end command toreturn to privilegedEXEC mode.Issue the exit commandto return to globalconfiguration mode orthe end command toreturn to privilegedEXEC mode.• Perform basic tests.• Display device status.• Issue show and debugcommands.• Copy images to thedevice.• Reload the device.• Manage deviceconfiguration files.• Manage device filesystems.Configure the device.Configure individualinterfaces.Configure individualterminal lines.iii