Cisco IOS Wide-Area Networking Configuration Guide - Free Books

MQC-Based Frame Relay Traffic ShapingConfiguration Examples for MQC-Based Frame Relay Traffic ShapingDETAILED STEPSStep 1Command or Actionservice-policy policy-mapExample:Router(config-map-class)# service-policy outputshape_policy_mapPurposeAdds a policy map to a map class.• The example command attaches the policy map namedshape_policy_map and its child policy map named llqto the PVC with the DLCI number 100. This commandwill also attach the policy map shape to any other PVCsthat are using the map class.Configuration Examples for MQC-Based Frame Relay TrafficShapingThis section provides configuration examples to match the identified configuration tasks in the previoussection.• Configuring Class-Based Weighted Fair Queueing Example, page 11• Configuring Class-Based Weighted Fair Queueing with Fragmentation Example, page 12Configuring Class-Based Weighted Fair Queueing ExampleThe following example provides a sample configuration for Class-Based Weighted Fair Queueing(CBWFQ) with FRTS.class-map voicematch ip dscp efpolicy-map llqclass voicepriority 32policy-map shape_policy_mapclass class-defaultshape average 64000shape adaptive 32000service-policy llqmap-class frame-relay shape_map_classinterface serial0/0encapsulation frame-relayinterface serial0/0.1 point-to-pointip address 192.168.1.1 255.255.255.0frame-relay interface-dlci 100class shape11