Cisco IOS Wide-Area Networking Configuration Guide - Free Books

How to Specify the X.25 VersionX.25 Version ConfigurationDETAILED STEPSStep 1Step 2Command or ActionenableExample:Router> enableconfigure terminalPurposeEnables privileged EXEC mode.• Enter your password if prompted.Enters global configuration mode.Step 3Example:Router# configure terminalinterface type numberorx25 profile name {dce | dte | dxe}Example:Router(config)# interface serial 1orConfigures an interface type and enters interfaceconfiguration mode.orConfigures an X.25 profile and enters X.25 profileconfiguration mode.Router(config)# x25 profileStep 4 x25 version {1980 | 1984 | 1988 | 1993}Example:Router(config-if)# x25 version 1980Specifies an X.25 behavior set.• The behavior sets are defined by the CCITT 1980,1984, and 1988 and ITU-T 1993 X.25recommendations.Verifying the X.25 Behavior Set for an Interface or X.25 ProfileSUMMARY STEPSPerform this task to verify which X.25 behavior set is being used by an interface or X.25 profile.1. enable2. show interfaces [type number]3. show x25 profile [name]4. show x25 context [xot | interface serial number [dlci number] | cmns-interface-type number [macmac-address]]10