Cisco IOS Wide-Area Networking Configuration Guide - Free Books

Terminal Line Security for PAD ConnectionsMonitoring and Maintaining X.25 CUG Support on Terminal LinesX.25 Serial1/1, 3 CUGs subscribed with no public accesslocal-cug 99 network-cug 9999, no-incoming, preferentiallocal-cug 100 network-cug 1000local-cug 101 network-cug 1001PROFILE cugs, 2 CUGs subscribed with with incoming public accesslocal-cug 1 network-cug 10, no-outgoinglocal-cug 2 network-cug 20, no-incoming, preferentialLine: 129 aux 0 , 1 CUGs subscribed with outgoing public accesslocal-cug 1 network-cug 10Line: 130 vty 0 , 4 CUGs subscribed with incoming and outgoing public accesslocal-cug 1 network-cug 10local-cug 50 network-cug 5, preferentiallocal-cug 60 network-cug 6, no-incominglocal-cug 70 network-cug 7, no-outgoingLine: 131 vty 1 , 1 CUGs subscribed with no public accesslocal-cug 1 network-cug 10Step 4Enter the show x25 cug command with the network-cug keyword to display information about allnetwork CUGs configured on the router. The following sample output displays the local CUGsassociated with network CUG 10:Router# show x25 cug network-cug 10PROFILE cugs, 2 CUGs subscribed with no public accessnetwork-cug 10 local-cug 1 , no-outgoingLine: 129 aux 0 , 1 CUGs subscribed with no public accessnetwork-cug 10 local-cug 1Line: 130 vty 0 , 4 CUGs subscribed with incoming and outgoing public accessnetwork-cug 10 local-cug 1Line: 131 vty 1 , 1 CUGs subscribed with no public accessnetwork-cug 10 local-cug 1Monitoring and Maintaining X.25 CUG Support on TerminalLinesTo monitor and maintain X.25 CUG support on terminal lines, use the following command in privilegedEXEC mode:CommandRouter# debug padPurposeDisplays debug messages for all PAD connections.Configuration ExamplesThis section provides the following configuration example:• Configuring X.25 CUG Support on Terminal Lines9