Cisco IOS Wide-Area Networking Configuration Guide - Free Books

How to Configure Frame Relay Voice-Adaptive Traffic Shaping and FragmentationFrame Relay Voice-Adaptive Traffic Shaping and FragmentationConfiguring Frame Relay Voice-Adaptive Traffic Shaping Using theClass-Default ClassSUMMARY STEPSDETAILED STEPSPerform the following task to configure the shaping policy, including Frame Relay voice-adaptive trafficshaping, in the class-default class.1. enable2. configure terminal3. policy-map policy-map4. class class-default5. shape [average | peak] mean-rate [[burst-size] [excess-burst-size]]6. shape adaptive mean-rate-lower-bound7. shape fr-voice-adapt [deactivation seconds]8. service-policy policy-map-name9. endStep 1Step 2Command or ActionenableExample:Router> enableconfigure terminalPurposeEnables privileged EXEC mode.• Enter your password if prompted.Enters global configuration mode.Step 3Step 4Step 5Example:Router# configure terminalpolicy-map policy-mapExample:Router(config)# policy-map SHAPEclass class-defaultExample:Router(config-pmap)# class class-defaultshape [average | peak] mean-rate [[burst-size][excess-burst-size]]Specifies the name of the policy map to be created ormodified.• Use this command to define the shaping policy.Specifies the default class so that you can configure ormodify its policy.Shapes traffic to the indicated bit rate according to thealgorithm specified.Example:Router(config-pmap-c)# shape average 600006