Cisco IOS Wide-Area Networking Configuration Guide - Free Books

Distributed Multilink Frame Relay (FRF.16)Supported Standards, MIBs, and RFCsSupported Standards, MIBs, and RFCsStandardsMultilink Frame Relay UNI/NNI Implementation Agreement (FRF.16.1), July 2001MIBsNo new or modified MIBs are supported by this feature.To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, useCisco MIB Locator found at the following URL:http://tools.cisco.com/ITDIT/MIBS/servlet/indexIf Cisco MIB Locator does not support the MIB information that you need, you can also obtain a list ofsupported MIBs and download MIBs from the Cisco MIBs page at the following URL:http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtmlTo access Cisco MIB Locator, you must have an account on Cisco.com. If you have forgotten or lost youraccount information, send a blank e-mail to cco-locksmith@cisco.com. An automatic check will verifythat your e-mail address is registered with Cisco.com. If the check is successful, account details with anew random password will be e-mailed to you. Qualified users can establish an account on Cisco.comby following the directions found at this URL:http://www.cisco.com/registerRFCsNo new or modified RFCs are supported by this feature.Prerequisites• Distributed Cisco Express Forwarding (CEF) must be enabled globally.• Multilink Frame Relay must be configured on the peer device.• The multilink Frame Relay peer device must not send frames that require assembly.Configuration TasksSee the following sections for configuration tasks for the Distributed Multilink Frame Relay feature.Each task in the list is identified as either optional or required.• Configuring a Multilink Frame Relay Bundle (required)• Configuring a Multilink Frame Relay Bundle Link (required)• Verifying Multilink Frame Relay (optional)5