Cisco IOS Wide-Area Networking Configuration Guide - Free Books

To access Feature Navigator, you must have an account on Cisco.com. If you have forgotten or lost youraccount information, send a blank e-mail to cco-locksmith@cisco.com. An automatic check will verifythat your e-mail address is registered with Cisco.com. If the check is successful, account details with anew random password will be e-mailed to you. Qualified users can establish an account on Cisco.comby following the directions at http://www.cisco.com/register.Feature Navigator is updated regularly when major Cisco IOS software releases and technology releasesoccur. For the most current information, go to the Feature Navigator home page at the following URL:http://www.cisco.com/go/fnSupported Standards, MIBs, and RFCsStandardsNo new or modified standards are supported by this feature.MIBsNo new or modified MIBs are supported by this feature.To obtain lists of supported MIBs by platform and Cisco IOS release, and to download MIB modules,go to the Cisco MIB website on Cisco.com at the following URL:http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtmlRFCsNo new or modified RFCs are supported by this feature.PrerequisitesDocumentation of the configuration tasks in this document assumes that you know how to configureX.25 networks.Configuration TasksSee the following sections for configuration tasks for the X.25 Record Boundary Preservation for DataCommunications Networks feature. One or more of the following tasks must be completed:• Configuring a PVC to Use RBP for Incoming X.25 Connections• Configuring SVCs to Use RBP for Incoming X.25 Connections• Configuring a PVC to Use RBP for Incoming TCP Connections• Configuring SVCs to Use RBP for Incoming TCP ConnectionsConfiguring a PVC to Use RBP for Incoming X.25 ConnectionsTo configure the router to establish a TCP session in response to data received on an X.25 PVC and touse RBP protocol to transfer data between the X.25 host and the TCP session, use the followingcommand in interface configuration mode:5