12.07.2015 Views

2004 Mazda RX-8 Owners Manual - MyMazda

2004 Mazda RX-8 Owners Manual - MyMazda

2004 Mazda RX-8 Owners Manual - MyMazda

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

J60E_8R65-EA-03C_Edition2.book Page 32 Saturday, April 26, 2003 1:48 PMMaintenance and CareOwner Maintenance3. Install the new bulb in the reverse orderof removal.Trunk light1. Press both sides of the lens cap toremove it.2. Disconnect the bulb by pulling it out.2. Turn the socket and bulb assemblycounterclockwise and remove it.3. Disconnect the bulb from the socket.Rear turn signal lightsBrake lights/TaillightsReverse lightsSocket3. Install the new bulb in the reverse orderof removal.▼ Replacing a Bulb (Rear)Rear turn signal lights, Brake lights/Taillights, Reverse lights1. Pull the center section of the plasticretainer and remove the retainers andpartially open the trunk side trim.4. Install the new bulb in the reverse orderof removal.Rear side-marker lightsDue to the complexity and difficulty ofthe procedure, the bulbs should bereplaced by an Authorized <strong>Mazda</strong> Dealer.High-mount brake light1. Turn the center section of the plasticretainer counterclockwise and removethe retainers and trunk rear trim.RemovalRemovalTrunk side trimInstallationInstallationTrunk rear trim2. Turn the socket and bulb assemblycounterclockwise and remove it.8-32Form No. 8R65-EA-03C

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!