12.07.2015 Views

2004 Mazda RX-8 Owners Manual - MyMazda

2004 Mazda RX-8 Owners Manual - MyMazda

2004 Mazda RX-8 Owners Manual - MyMazda

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

J60E_8R65-EA-03C_Edition2.book Page 33 Saturday, April 26, 2003 1:48 PMMaintenance and CareOwner Maintenance3. Disconnect the bulb from the socket.FusesYour vehicle’s electrical system isprotected by fuses.Socket4. Install the new bulb in the reverse orderof removal.License plate light1. Press the front of the lens to detach thefront tabs.2. Wrap a flathead screwdriver with a softcloth to prevent damage to the lens andremove the lens by carefully prying onthe edge of the lens with a flatheadscrewdriver.3. Disconnect the bulb by pulling it out.If any lights, accessories, or controls don’twork, inspect the appropriate circuitprotector. If a fuse has blown, the insideelement will be melted.If the same fuse blows again, avoid usingthat system and consult an Authorized<strong>Mazda</strong> Dealer as soon as possible.▼ Fuse ReplacementIf the electrical system doesn’t work, firstinspect fuses on the driver’s side.1. Turn off the ignition switch and otherswitches.2. Open the fuse panel cover.EdgeFuse panel cover4. Install the new bulb in the reverse orderof removal.8-33Form No. 8R65-EA-03C

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!