AKD⢠Installation Manual - TG Drives
AKD⢠Installation Manual - TG Drives
AKD⢠Installation Manual - TG Drives
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
AKD <strong>Installation</strong> | 8 Electrical <strong>Installation</strong>8.16.4 Digital Inputs (X7/X8)The drive provides 8 digital inputs (see page 113). These can be used to initiate pre-programmed functionsthat are stored in the drive. A list of these pre-programmed functions is included in the WorkBench. DigitalInput 8 is not programmable but is fixed to the ENABLE function.If an input is programmed, it must be saved to the drive.Depending on the selected function the inputs are high or low active.The inputs can be used with switched +24 V (source type) or switched GND (sink type). See diagrams below.Digital Input Wiring Diagram (Source type connection)116 Kollmorgen | December 2009
Change language