AKD™ Installation Manual - TG Drives

AKD Installation |8.2 Guide to electrical installation 738.3 Wiring 748.4 Components of a servosystem 758.5 Connector Assignments, AKD-x00306 to x00606 768.6 Connector Assignments, AKD-x01206 768.7 Connector Assignments, AKD-x02406 and AKD-xxxx07 778.8 Connection Diagram, AKD-x00306 to x00606 788.9 Connection Diagram, AKD-x01206 798.10 Connection Diagram, AKD-x02406 and AKD-xxxx07 808.11 EMI Noise Reduction 818.11.1 Recommendations for EMI Noise Reduction 818.11.2 Shielding with External Shielding Busbar 828.11.2.1 Shielding Concept 828.11.2.2 Shielding Busbar 838.11.3 Shielding Connection to the Drive 848.11.3.1 Grounding Plates 848.11.3.2 Shield connection clamps 848.11.3.3 Motor Connector X2 with shielding connection 858.12 Electrical Supply Connection 868.12.1 Connection to Various Mains Supply Networks AKD-xxxx06 (120V to 240V) 868.12.2 Connection to Various Mains Supply Networks AKD-xxxx07 (240V to 480V) 878.12.3 24 V Auxiliary Supply (X1) 888.12.4 Mains Supply Connection (X3, X4) 898.12.4.1 Three Phase connection (all AKD types) 898.12.4.2 Single phase connection (AKD-xxxx06 only) 908.12.5 External Brake Resistor (X3) 918.12.6 DC Bus Link (X3) 928.13 Motor Connection 948.13.1 Motor Power (X2) 958.13.1.1 Cable Length ≤ 25 m 958.13.1.2 Cable length >25 m 956 Kollmorgen | December 2009