AKD™ Installation Manual - TG Drives

AKD Installation | 6 Technical description and data6.5 Electrical Data AKD-xxxx06Electrical Data Units AKDx 00306 AKDx 00606 AKDx 01206 AKDx 02406Rated supply voltage, 50/60 Hz V~3 x 120 V -10%to 3 x 240 V +10% 3x240 V1 x 120 V -10%to 1 x 240 V +10% ±10%Rated input power for S1 operation kVA 1.2 2.38 3.82 7.6Rated input currentat 1x120 V A 5.0 9.9 12 -at 1x240 V A 5.0 9.9 12 -at 3x120 V A 2.3 4.6 9.2 -at 3x240 V A 2.3 4.6 9.2 18.3Permitted switch on/off frequency 1/h 30Max. inrush current A 10 10 10 20Aux. voltage supply V 24 V (±10%, check voltage drop)-current w/o motor brake, w/o option card A 0.5 0.6 0.7 1.0-current w/o motor brake with option card A 1.2 1.3 1.4 1.7-current with motor brake, w/o option card A 1.7 1.8 1.9 2.5-current with motor brake and option card A 2.4 2.5 2.6 3.2Rated DC bus link voltage V 170 to 340Continuous output current ( ± 3%)at 120 V Arms 3 6 12 -at 240 V Arms 3 6 12 24Peak output current (for approx.2 s, ± 3%) Arms 9 18 30 48Continuous output powerat 1x120 V W 450 750 1250 -at 1x240 V W 900 1500 2500 -at 3x120 V W tbd tbd tbd -at 3x240 V W tbd tbd tbd tbdPeak output power (for approx.2s)at 1x120 V VA 1300 2500 4000 -at 1x240 V VA 2600 5000 8000 -at 3x120 V VA tbd tbd tbd -at 3x240 V VA tbd tbd tbd tbdTechnical data for brake circuit — see page 43Motor inductance min.at 120 V mH 2.04 1.02 0.61 0.38at 240 V mH 4.44 2.22 1.33 0.83Motor inductance max. mH 200 100 50 25Thermal dissipation, output stage disable W max. 20 max. 20 max. 20 max. 25Thermal dissipation at rated current W 31 57 137 175Noise emission (low speed/high speed fan) dB(A) N/A 33/39 37/43 41/56tbd = to be discussed36 Kollmorgen | December 2009