Download - Fuji Xerox Printers

Standard 550 Sheet Tray and Optional 550 Sheet FeederPaper SizePaper TypeLoading CapacityA4 SEF (210 × 297 mm)B5 SEF (182 × 257 mm)A5 SEF (148 × 210 mm)Letter SEF (8.5 × 11 inches)Executive SEF (7.25 × 10.5 inches)Folio SEF (8.5 × 13 inches)Legal SEF (8.5 × 14 inches)Custom size * :Width: 148–215.9 mm (5.83–8.5 inches)Length: 210–355.6 mm (8.27 –14 inches)Plain (Lightweight)Plain (Heavyweight)Other TypeLightweight CardstockHeavyweight CardstockLight Glossy CardstockHeavy Glossy CardstockLetterheadHole PunchedColored550 sheets of standard paper*:XML Paper Specification (XPS) driver does not support custom size paper.NOTE:• SEF indicates the paper feed direction; SEF stands for short-edge feed.• For Plain and Label paper, you can set the paper density by selecting Adjust Paper Type (Lightweight orHeavyweight) under Maintenance Mode from the operator panel. Once you set the Adjust Paper Type settings,the printer uses the settings for Plain and Label paper.See also:• "Loading Print Media in the Standard 550 Sheet Tray and the Optional 550 Sheet Feeder" on page 121• "Loading Letterhead in the Standard 550 Sheet Tray and the Optional 550 Sheet Feeder" on page 123• "Loading Print Media in the Bypass Tray" on page 124• "Loading Envelope in the Bypass Tray" on page 125• "Loading Letterhead in the Bypass Tray" on page 126Printing on print media that differs from the paper size or paper type selected on the print driver, or loading printmedia into an unsuitable paper tray for printing, may lead to paper jams. To ensure that printing is correctly done,select the correct paper size, paper type, and paper tray.Printing Basics 117