Download - Fuji Xerox Printers

• Setting the FeaturesYou can set various security features using digital certificates.This section includes:• "Setting the Certificate in the IPsec Digital Signature Mode" on page 156• "Setting the SSL-use Server Certificate (HTTP/IPP)" on page 157• "Setting LDAP-SSL/TLS Communication" on page 157• "Setting Server Certificate Verification for LDAP-SSL/TLS Communication" on page 158• "Setting Client Certificate for LDAP-SSL/TLS Communication" on page 158• "Setting for Wireless LAN WPA-Enterprise (EAP-TLS)" on page 159• "Setting for Wireless LAN WPA-Enterprise (PEAPV0-MS-CHAPV2, EAP-TTLS PAP, EAP-TTLS CHAP)" onpage 160Setting the Certificate in the IPsec Digital Signature ModeNOTE:• To manage digital certificates, you must first set encryption of the optional hard disk unit to On, and then set up HTTPScommunication. For details, see "Preparing to Manage Certificates" on page 150.1 Import the certificate to be used with IPsec.See also:• "Importing a Digital Certificate" on page 1522 Set the certificate to be used with IPsec.See also:• "Setting a Digital Certificate" on page 1533 Confirm whether the certificate is set correctly in IPsec.See also:• "Confirming the Settings of a Digital Certificate" on page 1544 Launch CentreWare Internet Services.5 Click the Properties tab.6 In the left navigation panel, scroll down to Security and select IP sec.7 Select the Enabled check box for Protocol.8 Select Digital Signature from the IKE Authentication Method list.9 Set each item, as necessary.10 Click Apply.11 After restarting the printer, IPsec communication using digital signatures is enabled. You can execute IPseccommunication (Digital Signature mode) between the printer and the network device (such as computer) onwhich the certificate and IPsec are set identically as on this device.156 Printing Basics