Download - Fuji Xerox Printers

Printing ProblemsNOTE:• If Panel Lock Set is set to Enable, you need to enter the four digit password to enter the Admin Menu menu.ProblemJob did not print or incorrectcharacters printed.Print media misfeeds or multiplefeeds occur.The envelope is creased afterprinted.Page breaks in unexpectedplaces.Print media does not stack neatlyin the output tray.Cannot print from the standard550 sheet tray or the optional 550sheet feeder because the printmedia in the tray or feeder iscurled.ActionEnsure that the top menu appears on the LCD panel before you send a job to print.Press the (Menu) button twice to return to the top menu.Ensure that the print media is loaded in the printer. Press the (Menu) button twiceto return to the top menu.Verify that you are using the correct print driver.Ensure that the correct USB cable, Ethernet cable or wireless printer adapter issecurely connected to the printer.Verify that the correct print media size is selected.If you are using a print spooler, verify that the spooler has not stalled.Check the printer's interface from the Admin Menu menu.Determine the host interface you are using. Print a Panel Settings page to verify thatthe current interface settings are correct.Ensure that the print media you are using meets the specifications for your printer.See also:• "Usable Print Media" on page 116Fan the print media before loading it.Ensure that the print media is loaded correctly.Ensure that the width and length guides of the print media sources are adjustedcorrectly.Ensure that the standard 550 sheet tray, the optional 550 sheet feeder, or the bypasstray is securely inserted.Do not overload the standard 550 sheet tray, the optional 550 sheet feeder, or thebypass tray.Do not force print media into the bypass tray when you load it; otherwise, it may skewor buckle.Ensure that the print media is not curled.Face the recommended print side up.See also:• "Loading Print Media" on page 120Turn the print media over or around and try printing again to see if feeding improves.Do not mix print media types.Do not mix reams of print media.Remove the top and bottom curled sheets of a ream before loading the print media.Load print media only when the standard 550 sheet tray, the optional 550 sheetfeeder, or the bypass tray is empty.Wipe the feed roller in the standard 550 sheet tray, the optional 550 sheet feeder, orthe bypass tray with a cloth moistened with water.Make sure that the envelope is loaded in the bypass tray as instructed in "LoadingEnvelope in the Bypass Tray" on page 125.Increase the value for the time-out on the operator panel or CentreWare InternetServices.Turn the print media stack over in the standard 550 sheet tray or the bypass tray.Load the print media into the bypass tray.Troubleshooting 217