Download - Fuji Xerox Printers

• Audio TonesPurpose:To configure settings for tones emitted by the printer during operation or when a warning message appears.Values:Control Panel Off * Does not emit a tone when the operator panel input is correct.On Emits a tone when the operator panel input is correct.Invalid Key Off * Does not emit a tone when the operator panel input is incorrect.On Emits a tone when the operator panel input is incorrect.Machine Ready Off Does not emit a tone when the printer is ready to process a job.On* Emits a tone when the printer is ready to process a job.Job Completed Off Does not emit a tone when a job is complete.On* Emits a tone when a job is complete.Fault Tone Off Does not emit a tone when a job ends abnormally.On* Emits a tone when a job ends abnormally.Alert Tone Off Does not emit a tone when a problem occurs.On* Emits a tone when a problem occurs.Out of Paper Off Does not emit a tone when the printer runs out of paper.On* Emits a tone when the printer runs out of paper.Low Toner Alert Off Does not emit a tone when a toner is low.On* Emits a tone when a toner is low.AutoClear Alert Off * Does not emit a tone 5 seconds before the printer performs auto clear.On Emits a tone 5 seconds before the printer performs auto clear.All Tones Off Disables all the alert tones.On Sets the volume of all the alert tones at once.• mm / inchPurpose:To specify the default measurement unit displayed after the numeric value on the operator panel.Values:Millimeters (mm) *Inches (")Selects millimeter as the default measurement unit.Selects inch as the default measurement unit.NOTE:• The default for mm/inch varies depending on other settings, such as Document Size.• DefaultPaperSizePurpose:To specify the default paper size.Values:A4 - 210x297 *Letter - 8.5x11NOTE:• The default for DefaultPaperSize varies depending on region-specific factory default.Using the Operator Panel Menus 181