Download - Fuji Xerox Printers

Clearing JamsThis section includes:• "Avoiding Jams" on page 200• "Identifying the Location of Paper Jams" on page 201• "Clearing Paper Jams From the Bypass Tray" on page 202• "Clearing Paper Jams From the Standard 550 Sheet Tray" on page 204• "Clearing Paper Jams From the Fusing Unit" on page 206• "Clearing Paper Jams From the Optional 550 Sheet Feeder" on page 209• "Jam Problems" on page 211Careful selection of appropriate print media and proper loading allow you to avoid most jams.See also:• "About Print Media" on page 114• "Supported Print Media" on page 116NOTE:• Before buying large quantities of any print media, it is recommended that you try a sample first.• Avoiding Jams• Use only recommended print media.• See "Loading Print Media in the Standard 550 Sheet Tray and the Optional 550 Sheet Feeder" on page 121and "Loading Print Media in the Bypass Tray" on page 124 to load print media properly.• Do not overload the print media sources. Ensure that the print media stack height does not exceed themaximum height indicated by the load-line in the tray.• Do not load wrinkled, creased, damp, or curled print media.• Flex, fan, and straighten print media before you load it. If a jam occurs with print media, try feeding one sheet ata time through the bypass tray.• Do not use print media that you have cut or trimmed.• Do not mix print media sizes, weights, or types in the same print media source.• Ensure that the recommended print side is face up when you load the print media.• Keep print media stored in an acceptable environment.• Do not remove the feeding tray during a print job.• Push the tray in firmly after loading.• Ensure that all cables that connect to the printer are correctly attached.• Overtightening the guides may cause jams.• Wipe the feed roller in the tray or bypass tray with a cloth moistened with water if jams caused by misfeedingpaper occur frequently.See also:• "About Print Media" on page 114• "Supported Print Media" on page 116• "Print Media Storage Guidelines" on page 115200 Troubleshooting