Download - Fuji Xerox Printers

• Jam ProblemsThis section includes:• "Standard 550 Sheet Tray/Optional 550 Sheet Feeder Misfeed Jam" on page 211• "Bypass Tray Misfeed Jam" on page 212• "Regi Jam (Exit Sensor On JAM)" on page 213• "Exit Jam (Exit Sensor Off JAM)" on page 213• "Standard 550 Sheet Tray/Optional 550 Sheet Feeder Multi-feed Jam" on page 214• "Bypass Tray Multi-feed Jam" on page 214Standard 550 Sheet Tray/Optional 550 Sheet Feeder Misfeed JamProblemPrint media misfeeds occur in thestandard 550 sheet tray or theoptional 550 sheet feeder.ActionEnsure that the standard 550 sheet tray or the optional 550 sheet feeder is properlyinserted.If the problem persists, verify that the correct print media is being used.Verify that the correct print media is being used.See also:• "Usable Print Media" on page 116If not, use the print media recommended for the printer.If the problem persists, ensure that the print media is not curled.Ensure that the print media is not curled.If the problem persists, fan the print media.Ensure that the print media is not damp.If the print media is damp, turn over the print media.If the problem persists, use print media that is not damp.If the print media is not damp, fan the print media.Fan the print media.If the problem persists, wipe the feed roller in the standard 550 sheet tray or theoptional 550 sheet feeder with a cloth moistened with water.Wipe the feed roller in the standard 550 sheet tray or the optional 550 sheet feederwith a cloth moistened with water.If the problem persists, replace the drum cartridges if you have spare cartridges.Replace the drum cartridges if you have spare cartridges.See also:• "Replacing the Drum Cartridges" on page 260If the problem persists, contact the Fuji Xerox local representative office or anauthorised dealer.Troubleshooting 211