Download - Fuji Xerox Printers

Moving the PrinterThis section describes how to move the printer.NOTE:• If the optional 550 sheet feeder has been installed, uninstall the optional 550 sheet feeder before moving the printer. If theoptional 550 sheet feeder is not fixed securely to the printer, it may fall to the ground and cause injuries. For details on how touninstall the optional 550 sheet feeder, see "Removing the Optional 550 Sheet Feeder" on page 292.1 Turn off the printer and disconnect the power cord, interface cable, and any other cables.IMPORTANT:• If the optional hard disk unit is not installed on your printer, note that the data in the memory are cleared when the printeris turned off.2 Remove any paper in the output tray and return the output tray extension.3 Lift the printer and move it gently.IMPORTANT:• When lifting the machine, make sure to follow the precautions stated in "Machine Installation" on page 16.NOTE:• If you move the printer over a long distance, remove the toner cartridges from the printer to prevent tonerfrom spilling, and pack the printer inside a box.4 Adjust the color registration before using your printer.See also:• "Adjusting Color Registration" on page 235288 Maintenance