Download - Fuji Xerox Printers

• Output ColorPurpose:To specify the color mode to Color or Black and White. This setting is used for a print job that does not specify a printmode.Values:Black and White *ColorPrints in the black and white mode.Prints in the color mode.• Ignore FormFeedPurpose:To specify whether to ignore blank pages that only contain Form Feed control codes.Values:Off *OnDisables the Ignore FormFeed feature.Enables the Ignore FormFeed feature.PDF SettingsUse the PDF Settings menu to change printer settings that only affect the PDF jobs.NOTE:• Values marked by an asterisk (*) are the factory default menu settings.• QuantityPurpose:To specify the number of copies to print.Values:1 sets * Sets the value in increments of 1.1–999• 2-Sided PrintPurpose:To specify whether to print on both sides of a sheet of paper.Values:1-Sided *Long Edge FlipShort Edge FlipDoes not print on both sides of a sheet of paper.Prints on both sides of a sheet of paper to be bound by long edge.Prints on both sides of a sheet of paper to be bound by short edge.• Print ModePurpose:To specify the print mode.Values:Normal *High QualityHigh SpeedFor documents with normal sized characters.For documents with small characters or thin lines, or documents printed using a dot-matrixprinter.Prints with the higher speed than the Normal mode, but the quality is less.170 Using the Operator Panel Menus