Download - Fuji Xerox Printers

PS SettingsUse the PS Settings menu to change printer settings that only affect jobs using the PostScript ® emulation printerlanguage.NOTE:• Values marked by an asterisk (*) are the factory default menu settings.• PS Error ReportPurpose:To specify whether to print the contents of PostScript errors.The change becomes effective after the printer is turned off and then on again.Values:OffOn*Discards the print job without printing an error message.Prints an error message before it discards the job.NOTE:• Instructions from the PS driver override the settings specified on the operator panel.• PS Job Time-outPurpose:To specify the runtime of one PostScript job.The change becomes effective after the printer is turned off and then onagain.Values:Off*Job time-out does not occur.On 1 min A PostScript error occurs if processing is not completed after the specified1-900 mintime.• Paper Select ModePurpose:To set the way to select the paper tray for PostScript mode.The change becomes effective after the printer is turnedoff and then on again.Values:Auto*Select FromTrayThe tray is selected as the same setting as in the PCL mode.The tray is selected in a method compatible with regular PostScript printers.• Output ColorPurpose:To specify the color mode to Color or Black and White. This setting is used for a print job which does not specify aprint mode.Values:Color*Black and WhitePrints in color mode.Prints in black and white mode.172 Using the Operator Panel Menus