Download - Fuji Xerox Printers

Using the lpr commandNOTE:• For Windows Vista or later, enable the lpr command first. The following procedure uses Windows 7 as an example.abClick Start → Control Panel → Programs → Turn Windows features on or off.In the Windows Features dialog box, select the LPR Port Monitor check box under Print and DocumentServices.In the command prompt, enter the lpr command as described in the following example:Example: Printing "event.pdf" when the printer's IP address is 192.168.1.100.C:\> lpr -S 192.168.1.100 -P lp event.pdfUsing the ftp commandIn the command prompt, enter the ftp command as described in the following example:Example: Printing "event.pdf" when the printer's IP address is 192.168.1.100.C:\> ftp 192.168.1.100Connected to 192.168.1.100.220 FUJI XEROX DocuPrint XXXXUser (192.168.1.100:(none)):331 Password requiredPassword:230 Logged inftp> bin200 Command successfulftp> put event.pdf200 Command successful150 Opening data connection226 Transfer completeftp: xxxxx bytes sent in xxxSeconds xxxxxkbytes/sec.ftp>134 Printing Basics