Download - Fuji Xerox Printers

• Using the Stored Print FeatureWhen you send a job to the printer, you can specify in the print driver to store the job in the memory or hard disk.When you are ready to print the job, go to the printer and use the operator panel menus to identify which job in thememory or hard disk you want to print.NOTE:• The Stored Print feature is available when:- The optional 512MB memory is installed.- The RAM disk is enabled in the operator panel menu.- RAM Disk is set to Installed in the print driver.OR- The optional hard disk unit is installed.- Hard Disk is set to Installed in the print driver.• The data in memory is cleared when the printer is turned off. The data on the optional hard disk unit is not cleared even whenthe printer is turned off.The stored print feature includes the following job types:• "Secure Print" on page 131• "Sample Print" on page 131Secure PrintYou can store print jobs secured with a passcode in the memory or hard disk. Users with the passcode can printthem from the operator panel. This feature can be used to print confidential documents. You can select whether todelete the stored job after printing. Otherwise, the stored jobs remain in the memory until you delete them from theoperator panel or turn off the printer, or in the hard disk until you delete them from the operator panel.Send confidential data.Enter the passcode fromthe operator panel.Print data.ConfidentialNOTE:• Secure Print is available when you use the PCL 6 or PS driver.Sample PrintThe collated print job is stored in the memory or hard disk, but a single copy is printed automatically so you cancheck the print result. If you do not have problems with the print result, you can choose to print more copies. Thisprevents large number of misprinted copies from being printed at one time.Send data.One set isprinted.Check if the print resultis OK.Print the rest of setsfrom the operator panel.NOTE:• Sample Print is available when you use the PCL 6 or PS driver.Printing Basics 131