Download - Fuji Xerox Printers

• Dynamic Methods of Setting the Printer’s IP AddressThere are two protocols available for dynamically setting the printer’s IP address:• DHCP (enabled by default)• AutoIPYou can turn on/off both protocols using the operator panel or CentreWare Internet Services.NOTE:• You can print a report that includes the printer’s IP address. On the operator panel, press the (Menu) button, selectReport / List, press the button, select Printer Settings, and then press the button. The IP address is listedon the Printer Settings page.Using the Operator PanelTo turn on/off either the DHCP or AutoIP protocol:1 On the operator panel, press the (Menu) button.2 Select Admin Menu, and then press the button.3 Select Network Setup, and then press the button.4 Select TCP/IP, and then press the button.5 Select IPv4, and then press the button.6 Select Get IP Address, and then press the button.7 Select DHCP / Autonet, and then press the button.Using CentreWare Internet ServicesTo turn on/off either the DHCP or AutoIP protocol:1 Launch your web browser.2 Enter the IP address in the browser’s address field, and then press the Enter key.3 Select Properties.4 Select the Protocol Settings folder on the left navigation panel.5 Select TCP/IP.6 In the Get IP Address field, select the DHCP / Autonet option.7 Click the Apply button.70 Printer Connection and Software Installation