Download - Fuji Xerox Printers

• Adjust ColorRegiPurpose:To manually perform color registration adjustment.manual color registration adjustments are required when the printer is initially installed and after the printer is moved.NOTE:• The Adjust ColorRegi feature can be configured when Auto Adjust Regi is set to Off.Values:NOTE:Auto AdjustAutomatically performs color registration correction.ColorRegi ChartPrints a color registration chart. The color registration chart prints a latticepattern of yellow, magenta, and cyan lines. On the chart, find the values onthe right side that are next to the line that is perfectly straight for each ofthe three colors. If the value for this line is 0, color registration adjustmentis not required. If the value for this line is any value other than 0, specifythe adjustment values for lateral adjustment and process adjustment underEnter Number.Enter Number LY -12 to +12 Sets lateral (perpendicular to paper feed direction) and process (paperLMfeed direction) color adjustment values individually for Yellow, Magenta,and Cyan. Enter a number in order of lateral adjustment (left), lateralLCadjustment (right), and process adjustment. Press the button to saveRY -12 to +12 all the settings.RMRCPY -12 to +12PMPC• Ensure that you remove the paper from the bypass tray before performing Auto Adjust.• Initialize NVMPurpose:To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menuparameters, except the parameters for the network, are reset to their default values.See also:• "Resetting to Factory Defaults" on page 198• Init Print MeterPurpose:To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to zero.• Reset Trans UnitPurpose:To initialize the life counter of the transfer unit. After replacing the transfer unit, be sure to initialize its life counter.• Clear JobHistoryPurpose:To clear the job history of all finished jobs.Using the Operator Panel Menus 187