Download - Fuji Xerox Printers

Updating Your Driver to Detect Optional Hard Disk UnitThe following procedure uses Windows and the PCL 6/PS driver.NOTE:• When you use XML Paper Specification (XPS) driver, the following settings are not required.Windows 8/Windows 8 x64/Windows Server 2012Windows 7/Windows 7 x64/Windows Server 2008 R2 x64Windows Vista/Windows Vista x64Windows Server 2008/Windows Server 2008 x64Windows XP/Windows XP x64/Windows Server 2003/Windows Server 2003 x641 On the Windows desktop, right-click the bottom left corner of the screen, and thenclick Control Panel → Hardware and Sound (Hardware for Windows Server2012) → Devices and Printers.2 Right-click the printer icon of the DocuPrint CP405 d and select Printerproperties.3 Click the Configuration tab, and then select Bi- Directional Setup.4 Select Get Information from Printer and then select OK.5 Click Apply, and then click OK.6 Close the Devices and Printers dialog box.1 Click Start → Devices and Printers.2 Right-click the printer icon of the DocuPrint CP405 d and select Printerproperties.3 Click the Configuration tab, and then select Bi- Directional Setup.4 Select Get Information from Printer and then select OK.5 Click Apply, and then click OK.6 Close the Devices and Printers dialog box.1 Click Start → Control Panel → Hardware and Sound → Printers.2 Right-click the printer icon of the DocuPrint CP405 d and select Properties.3 Click the Configuration tab, and then select Bi- Directional Setup.4 Select Get Information from Printer and then select OK.5 Click Apply, and then click OK.6 Close the Printers dialog box.1 Click Start → Control Panel → Printers.2 Right-click the printer icon of the DocuPrint CP405 d and select Properties.3 Click the Configuration tab, and then select Bi- Directional Setup.4 Select Get Information from Printer and then select OK.5 Click Apply, and then click OK.6 Close the Printers dialog box.1 Click Start (start for Windows XP) → Printers and Faxes.2 Right-click the printer icon of the DocuPrint CP405 d and select Properties.3 Click the Configuration tab, and then select Bi- Directional Setup.4 Select Get Information from Printer and then select OK.5 Click Apply, and then click OK.6 Close the Printers and Faxes dialog box.If the printer information is not updated automatically after clicking Get Information from Printer, follow these steps:1 Click the Configuration tab, and then select Installable Options.2 Select Hard Disk in the Items list box.3 Select Installed in the Hard Disk drop-down menu under Setting for.4 Click OK.5 Click Apply, and then click OK.6 Close the Devices and Printers (, Printers, or Printers and Faxes) dialog box.Basic Operation 53