Download - Fuji Xerox Printers

IP ModePurpose:To configure IP Mode.Values:Dual Stack *IPv4IPv6Uses both IPv4 and IPv6 to set the IP address.Uses IPv4 to set the IP address.Uses IPv6 to set the IP address.IPv4Purpose:To configure IPv4 settings.Values:• IPsecGet IP Address DHCP / Autonet * Sets the IP address automatically. A random value in the rangeof 169.254.1.0 to 169.254.254.255 that is not currently inuse on the network is set as the IP address. The subnet mask isset as 255.255.0.0.BOOTPSets the IP address using BOOTP.RARPSets the IP address using RARP.DHCPSets the IP address using DHCP.PanelUse this option when you want to set the IP address manually onthe operator panel.IP AddressWhen an IP address is being set manually, the IP is allocated tothe printer using the format nnn.nnn.nnn.nnn. Each octet thatmakes up nnn.nnn.nnn.nnn is a value in the range of 0 to254. 127 and any value in the range of 224 to 254 cannot bespecified for the first octet of a gateway address.Subnet MaskWhen an IP address is being set manually, the subnet mask isspecified using the format nnn.nnn.nnn.nnn. Each octet thatmakes up nnn.nnn.nnn.nnn is a value in the range of 0 to255.255.255.255.255 cannot be specified as the subnetmask.GatewayAddressWhen an IP address is being set manually, the gateway addressis specified using the format nnn.nnn.nnn.nnn. Each octetthat makes up nnn.nnn.nnn.nnn is a value in the range of 0 to254. 127 and any value in the range of 224 to 254 cannot bespecified for the first octet of a gateway address.NOTE:• IPsec feature is available only when IPsec is enabled on the CentreWare Internet Services.Purpose:Disables IPsec.176 Using the Operator Panel Menus