Download - Fuji Xerox Printers

• Checking Status of Print DataThis section includes:• "Checking Status (Windows Only)" on page 145• "Checking Status in CentreWare Internet Services (Windows & Mac OS X)" on page 145Checking Status (Windows Only)Printer information and status can be checked with SimpleMonitor. By default, the Status Monitor window launcheswhen printing and an error occurs. To display the Status Monitor window manually, double-click the SimpleMonitorprinter icon on the taskbar at the bottom right of the screen. From the displayed window, click the name of thedesired printer listed.For more information about SimpleMonitor, see Help: The following procedure uses Windows 7 as an example:1 Click Start → All Programs.2 Select Fuji Xerox.3 Select SimpleMonitor for Asia-Pacific.4 Select SimpleMonitor Help.See also:• "SimpleMonitor (Windows Only)" on page 62Checking Status in CentreWare Internet Services (Windows & MacOS X)You can check the status of the print job sent to the printer at the Jobs tab of CentreWare Internet Services.See also:• "Printer Management Software" on page 59• Printing With AirPrintThis section provides information for printing with AirPrint. AirPrint allows you to print through a networkwith iPad (all models), iPhone (3GS or later), and iPod touch (3rd generation or later) running the latestversion of iOS. AirPrint also allows you to accomplish basic network printing with Macintosh (Mac OS X10.7 or later) without installing additional drivers.Setting Up AirPrint on Your PrinterTo use AirPrint, Bonjour (mDNS) and IPP protocols are required on your printer. Make sure that Bonjour (mDNS)and IPP are set to Enable on the operator panel menu. For details, see "Protocol" on page 177. Bonjour (mDNS)and IPP can also be enabled by clicking Turn on AirPrint from the CentreWare Internet Services. Follow theprocedure below to configure the environment settings for AirPrint from the CentreWare Internet Services.1 Ensure that the printer is connected to the network.2 Launch the CentreWare Internet Services by entering the IP address of the printer in your web browser.3 When the CentreWare Internet Services opens, go to the page of AirPrint in Protocol Settings under theProperties tab. Click Turn on AirPrint in Enable AirPrint. The printer is ready for AirPrint.NOTE:• If the Turn on AirPrint button is not active, it means that both Bonjour (mDNS) and IPP are already set to Enable on theoperator panel menu and the printer is ready for AirPrint.Printing Basics 145