Download - Fuji Xerox Printers

• Vertical BlanksProblemThe printed result has verticalblanks.ActionClean inside the printer by using the cleaning rod.See also:• "Cleaning the Raster Optical Scanner (ROS) Window" on page 252If the problem persists, ensure the light path is not covered.Ensure the light path is not covered.1 Remove the drum cartridges, and keep it in the dark place.See also:• "Replacing the Drum Cartridges" on page 2602 Check the light path, and then remove the shielding.3 Re-install the drum cartridges.See also:• "Installing the Drum Cartridges" on page 263If the problem persists, replace the drum cartridges if you have spare cartridges.Replace the drum cartridges if you have spare cartridges.See also:• "Replacing the Drum Cartridges" on page 260• "Installing the Drum Cartridges" on page 263If the problem persists, contact the Fuji Xerox local representative office or anauthorised dealer.• MottleProblemThe printed result has mottledappearance.ActionVerify that the print media recommended for the printer is being used.If you use non-recommended print media, use the print media recommended for theprinter.If the problem persists, contact the Fuji Xerox local representative office or anauthorised dealer.Troubleshooting 225