Download - Fuji Xerox Printers

Adjusting Color RegistrationThis section describes how to adjust the color registration when you first install the printer or after moving it to a newlocation.This section includes:• "Performing Auto Adjust" on page 235• "Printing the Color Registration Chart" on page 235• "Determining Values" on page 236• "Entering Values" on page 238NOTE:• If Panel Lock Set is set to Enable, you need to enter the four digit password to enter the Admin Menu menu.• Performing Auto AdjustAuto Adjust allows you to correct the color registration automatically.1 Press the (Menu) button.2 Select Admin Menu, and then press the button.3 Select Maintenance Mode, and then press the button.4 Select Adjust ColorRegi, and then press the button.5 Select Auto Adjust, and then press the button.6 Ensure that Are You Sure? appears, and then press the button.Auto Adjust is performed.• Printing the Color Registration Chart1 Press the (Menu) button.2 Select Admin Menu, and then press the button.3 Select Maintenance Mode, and then press the button.4 Select Adjust ColorRegi, and then press the button.5 Select ColorRegi Chart, and then press the button.6 Ensure that Are You Sure? appears, and then press the button.The color registration chart is printed.Troubleshooting 235