Download - Fuji Xerox Printers

• Replacing the Belt Unit, the 2nd BTR, and the RetardRollerYou need to replace three parts (belt unit, 2nd BTR, and retard roller) at a time. Both the 2nd BTR and the retardroller for replacement come with a new belt unit.Fuji Xerox belt unit, 2nd BTR, and retard roller are available only through Fuji Xerox. To order by phone, see also"Online Services" on page 301.It is recommended that you use Fuji Xerox 2nd BTR, belt unit, and retard roller for your printer. Fuji Xerox does notprovide warranty coverage for problems caused by using accessories, parts, or components not supplied by FujiXerox.IMPORTANT:• Ensure nothing touches or scratches the surface (black-colored film) of the belt unit. Scratches, dirt, or oil from your hands onthe film of the belt unit may reduce print quality.This section includes:• "Removing the Belt Unit" on page 270• "Installing a Belt Unit" on page 273• "Removing the 2nd BTR" on page 274• "Installing a 2nd BTR" on page 275• "Removing the Retard Roller Unit in the Standard 550 Sheet Tray" on page 276• "Installing a Retard Roller in the Standard 550 Sheet Tray" on page 277OverviewWhen a belt unit reaches its usable life-span, the following messages appear on the LCD panel.Message Remaining Page Yield Printer Status and ActionTransferUnitLife5,000 pages The belt unit has become low. Prepare a new one.Replace SoonReplaceTransfer Unit- The belt unit has become empty. Replace the old beltunit with a new one.Press the button to reset the belt unit counter.Has Trans Unitbeen replaced?Maintenance 269