Download - Fuji Xerox Printers

More documents

Recommendations

Info

ItemsPower consumptionDimensions (main unit only)WeightUsage EnvironmentDescriptionMaximum: 1350 W, During the Sleep mode: 5.0 W or lessAverage:During standby: 76 W or lessDuring continuous printing: 705 W or lessIMPORTANT:• Low Power Mode: 14 W average(The printer does not use electricity when the power is switched off even with thepower cord is plugged in.)427 (W) × 488 (D) × 384 (H) mm25.2 kg (main unit only, including consumables)During Use: Temperature: 10 - 32 °C; Humidity: 10 - 85% (except malfunctions dueto dew condensation)Non-Use: Temperature: -20 - 40 °C; Humidity: 5 - 85% (except malfunctions due todew condensation)IMPORTANT:• Until the conditions (temperature and humidity) inside the printer becomeacclimated to the installation environment, certain qualities of the paper cancause poor printing.30 Specifications
2Basic OperationThis chapter includes:• "Main Components" on page 32• "Installing Optional Accessories" on page 35• "Turning on the Printer" on page 55• "Printing a Panel Settings Page" on page 56• "Power Saver Mode" on page 57Basic Operation 31
Page 1 and 2: DocuPrint CP405 dUser Guide
Page 3 and 4: PrefaceThank you for purchasing the
Page 5 and 6: ContentsPreface ...................
Page 7 and 8: Using the Stored Print Feature.....
Page 9 and 10: Managing the Printer ..............
Page 11 and 12: Types of ManualsManuals included wi
Page 13 and 14: Safety NotesBefore using this produ
Page 15 and 16: Always switch off and unplug the ma
Page 17 and 18: Locate this product in a well-venti
Page 19 and 20: Do not attempt to remove a paper de
Page 21 and 22: • Warning and Caution LabelsBe su
Page 23 and 24: Regulation•Radio Frequency Emissi
Page 25 and 26: Illegal Copies and PrintoutsCopying
Page 27 and 28: 1SpecificationsThis chapter lists t
Page 29: Supported OSItemsDescriptionStandar
Page 33 and 34: • Rear View109123876451 Control B
Page 35 and 36: Installing Optional AccessoriesYou
Page 37 and 38: 7 Close the control board cover, an
Page 39 and 40: 7 Click Apply, and then click OK.8
Page 41 and 42: 6 Hold the standard 550 sheet tray
Page 43 and 44: Updating Your Driver to Detect Opti
Page 45 and 46: Thank you for purchasing the Wirele
Page 47 and 48: 3 Click Wireless Network Kit b/g/n.
Page 49 and 50: 3 Turn on the printer.If a message
Page 51 and 52: 5 Insert the two plastic pins on th
Page 53 and 54: Updating Your Driver to Detect Opti
Page 55 and 56: Turning on the PrinterIMPORTANT:•
Page 57 and 58: Power Saver ModeThe printer has an
Page 59 and 60: 3Printer Management SoftwareUse the
Page 61 and 62: CentreWare Internet ServicesThis se
Page 63 and 64: Setup Disk Creation Tool (Windows O
Page 65 and 66: 4Printer Connection and SoftwareIns
Page 67 and 68: Connecting Your PrinterYour printer
Page 69 and 70: Setting the IP AddressThis section
Page 71 and 72: • Assigning an IP Address (for IP
Page 73 and 74: Installing Print Driver on Computer
Page 75 and 76: • Inserting the CD-ROM• For Ins
Page 77 and 78: 8 Click OK.9 Select your printer na
Page 79 and 80: • For Installing XML Paper Specif
Page 81 and 82:
Windows Server 2008 R21 Click Start
Page 83 and 84:
Windows 8, Windows 8 64-bit Edition
Page 85 and 86:
• For Windows 7, Windows 7 64-bit
Page 87 and 88:
• For Windows Vista and Windows V
Page 89 and 90:
Page 91 and 92:
• For Windows Vista and Windows V
Page 93 and 94:
Page 95 and 96:
Installing Print Driver on Computer
Page 97 and 98:
• Setting Up the QueueTo execute
Page 99 and 100:
• For SUSE Linux Enterprise Deskt
Page 101 and 102:
• Uninstalling the Print Driver
Page 103 and 104:
Configuring the Optional Wireless P
Page 105 and 106:
4 Click Start wireless settings.5 C
Page 107 and 108:
• Using Non-Wizard Setup to Confi
Page 109 and 110:
Manual SSID Setup1 Press the (Menu)
Page 111 and 112:
Reconfiguring the Wireless Settings
Page 113 and 114:
5Printing BasicsThis chapter includ
Page 115 and 116:
• Print Media That Can Damage You
Page 117 and 118:
Standard 550 Sheet Tray and Optiona
Page 119 and 120:
SupportedPaperSpecialPaperPaper Nam
Page 121 and 122:
• Loading Print Media in the Stan
Page 123 and 124:
Loading Letterhead in the Standard
Page 125 and 126:
5 Slide both width guides until the
Page 127 and 128:
Linking TraysWhen the optional 550
Page 129 and 130:
PrintingThis section covers how to
Page 131 and 132:
• Using the Stored Print FeatureW
Page 133 and 134:
• Deleting Stored JobsA job that
Page 135 and 136:
• Duplex PrintingDuplex printing
Page 137 and 138:
• Selecting Printing OptionsThis
Page 139 and 140:
Selecting Options for an Individual
Page 141 and 142:
Defining Custom Paper SizesBefore p
Page 143 and 144:
• Using the Mac OS X Print Driver
Page 145 and 146:
• Checking Status of Print DataTh
Page 147 and 148:
• Printer SettingsYou can select
Page 149 and 150:
• Printer SetupYou can install yo
Page 151 and 152:
• Changing the Encryption Setting
Page 153 and 154:
6 Enter a password corresponding to
Page 155 and 156:
6 Select the category from the Cate
Page 157 and 158:
Setting the SSL-use Server Certific
Page 159 and 160:
Setting for Wireless LAN WPA-Enterp
Page 161 and 162:
cdIn the left navigation panel, scr
Page 163 and 164:
6Using the Operator Panel MenusThis
Page 165 and 166:
Print MeterPurpose:To print the rep
Page 167 and 168:
• OrientationPurpose:To specify h
Page 169 and 170:
• QuantityPurpose:To set the defa
Page 171 and 172:
• PasswordPurpose:To specify the
Page 173 and 174:
Network SetupUse the Network Setup
Page 175 and 176:
Ad-hocEncryptionTypeWPA-PSK-TKIPWPA
Page 177 and 178:
• ProtocolPurpose:To enable or di
Page 179 and 180:
• Port StatusNOTE:• Port Status
Page 181 and 182:
• Audio TonesPurpose:To configure
Page 183 and 184:
• Banner SheetNOTE:• Banner She
Page 185 and 186:
• Adjust PaperTypePurpose:To spec
Page 187 and 188:
• Adjust ColorRegiPurpose:To manu
Page 189 and 190:
Secure SettingsUse the Secure Setti
Page 191 and 192:
• Bypass TrayPurpose:To specify t
Page 193 and 194:
• Tray1Purpose:To specify the pap
Page 195 and 196:
Tray PriorityPurpose:To set the pri
Page 197 and 198:
Setting the Power Saver Time Option
Page 199 and 200:
7TroubleshootingThis chapter includ
Page 201 and 202:
• Identifying the Location of Pap
Page 203 and 204:
5 Remove the jammed paper.6 Insert
Page 205 and 206:
5 Remove the jammed paper.6 Insert
Page 207 and 208:
5 Push down the latch to open the r
Page 209 and 210:
• Clearing Paper Jams From the Op
Page 211 and 212:
• Jam ProblemsThis section includ
Page 213 and 214:
Regi Jam (Exit Sensor On JAM)Proble
Page 215 and 216:
Basic Printer ProblemsSome printer
Page 217 and 218:
Printing ProblemsNOTE:• If Panel
Page 219 and 220:
• The Output Is Too LightProblemT
Page 221 and 222:
• Random Spots/Blurred ImagesProb
Page 223 and 224:
• Streaks Appear on the OutputPro
Page 225 and 226:
• Vertical BlanksProblemThe print
Page 227 and 228:
• FogProblemThe printed result is
Page 229 and 230:
• BandingProblemThe printed resul
Page 231 and 232:
• Damage on the Leading Edge of P
Page 233 and 234:
• Images Are SkewedProblemThe pri
Page 235 and 236:
Adjusting Color RegistrationThis se
Page 237 and 238:
Slow ScanOn the Chart 2 of the colo
Page 239 and 240:
Digital Certificate ProblemProblemT
Page 241 and 242:
Other ProblemsProblemCondensation h
Page 243 and 244:
016-923 Press the button, or wait f
Page 245 and 246:
Getting HelpThis section includes:
Page 247 and 248:
8MaintenanceThis chapter includes:
Page 249 and 250:
3 Open the side cover.4 Turn the wa
Page 251 and 252:
10 Reinsert the belt unit into the
Page 253 and 254:
3 Grasp the handle on the waste ton
Page 255 and 256:
11 Close the side cover.Maintenance
Page 257 and 258:
• Replacing the Toner CartridgesF
Page 259 and 260:
4 Close the front cover.Maintenance
Page 261 and 262:
Removing the Drum Cartridges1 Open
Page 263 and 264:
Installing the Drum Cartridges1 Unp
Page 265 and 266:
13 Turn the waste toner box lock le
Page 267 and 268:
Removing the Fusing Unit1 Turn off
Page 269 and 270:
• Replacing the Belt Unit, the 2n
Page 271 and 272:
4 Grasp the handle on the waste ton
Page 273 and 274:
Installing a Belt Unit1 Unpack a ne
Page 275 and 276:
Installing a 2nd BTR1 Unpack a new
Page 277 and 278:
Installing a Retard Roller in the S
Page 279 and 280:
Removing the Waste Toner Box1 Open
Page 281 and 282:
Ordering SuppliesThis section inclu
Page 283 and 284:
Storing Print MediaTo avoid potenti
Page 285 and 286:
Managing the PrinterThis section in
Page 287 and 288:
Checking Page CountsThe total numbe
Page 289 and 290:
Removing OptionsIf the printer loca
Page 291 and 292:
7 Close the control board cover, an
Page 293 and 294:
4 Remove the two screws joining the
Page 295 and 296:
5 Open the control board cover comp
Page 297 and 298:
5 Open the control board cover comp
Page 299 and 300:
9Contacting Fuji XeroxThis chapter
Page 301 and 302:
Online ServicesYou can find detail
Page 303 and 304:
IndexNumerics2nd BTR ..............
Page 305 and 306:
LCD panel .........................
Page 307 and 308:
SafetySElectrical .................
Page 310:
DocuPrint CP405 d User GuideFuji Xe
show all

Download - Fuji Xerox Printers

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?