Download - Fuji Xerox Printers

Print Quality ProblemsThis section includes:• "The Output Is Too Light" on page 219• "Toner Smears or Print Comes Off" on page 220• "Random Spots/Blurred Images" on page 221• "The Entire Output Is Blank" on page 222• "Streaks Appear on the Output" on page 223• "Part or the Entire Output Is Black" on page 223• "Pitched Color Dots" on page 224• "Vertical Blanks" on page 225• "Mottle" on page 225• "Ghosting" on page 226• "Light-Induced Fatigue" on page 226• "Fog" on page 227• "Bead-Carry-Out (BCO)" on page 227• "Jagged Characters" on page 228• "Banding" on page 229• "Auger Mark" on page 229• "Wrinkled/Stained Paper" on page 230• "Damage on the Leading Edge of Paper" on page 231• "The Top and Side Margins Are Incorrect" on page 231• "Color Registration Is out of Alignment" on page 232• "Protrudent/Bumpy Paper" on page 232• "Images Are Skewed" on page 233NOTE:• In this section, some procedures use the operator panel, CentreWare Internet Services or PCL 6 driver.See also:• "Understanding the Printer Menus" on page 164• "CentreWare Internet Services" on page 61218 Troubleshooting