Removing asbestos in workplaces - Compliance ... - WorkSafe Victoria

AppendicesAppendix Q – Information required to be includedin an asbestos control planInformation required to be included in an asbestos control plan:1. A record to indicate that the notification requirements have been metand that required documentation is kept at the workplace where theasbestos removal work is being performed.2. In relation to asbestos:• its location• in relation to ACM:– whether the ACM is friable or non-friable– the type of ACM– the condition of the ACM– the quantity of ACM proposed to be removed.3. The type of personal protective clothing and personal protective equipmentto be used, including respiratory protective equipment.4. Proposed risk control measures to be used to prevent release of airborneasbestos fibres from the area where the asbestos removal work is beingperformed.5. If the area where the asbestos removal work is being performed in anegative air enclosure, details regarding:• smoke testing• negative air units.6. Details of decontamination procedures for:• persons performing the asbestos removal work• tools and equipment used for the asbestos removal work• non-disposable personal protective clothing and personal protectiveequipment.7. Method of disposal of:• asbestos waste• disposable personal protective clothing and personal protective equipment• the structure used to enclose the areas where the asbestos removal workis being performed.8. Administrative controls to be implemented, including:• security• work practices.9. Methods of cleaning following asbestos removal work.10. Names of persons engaged by the licence holder or person who commissionedthe work (as applicable) to conduct asbestos paraoccupational air monitoring(if any) and to conduct the clearance inspection.114 Compliance code / Removing asbestos in workplaces WorkSafe Victoria