SAFA Ramp Inspections - Code7700

SAFA Ramp Inspection ProceduresGuidance materialInspection Item Std. Cat. Std. ref. Standard’s Text Pre-described Finding PDF code Instructions forcompleting the detaileddescriptionaeroplane, to the operator, at the termination ofthe flight.A6-I-6.1.3 The operator shall include in the operationsmanual a minimum equipment list (MEL),approved by the State of the Operator which willenable the pilot-in-command to determinewhether a flight may be commenced orcontinued from any intermediate stop should anyinstrument, equipment or systems becomeinoperative. Where the State of the Operator isnot the State of Registry, the State of theOperator shall ensure that the MEL does notaffect the aeroplane's compliance with theAirworthiness requirements applicable in theState of Registry.A23 I 3 A6-I-8.7.5.2 The maintenance organization shall have thenecessary technical data, equipment, tools andmaterial to perform the work for which it isapproved.Maintenance personnel workingon the aircraft without usingappropriate tooling and/ortechnical dataA23-13A6-I-8.1.2 An operator shall not operate an aeroplaneunless it is maintained and released to serviceby an organization approved in accordance with8.7, or under an equivalent system, either ofwhich shall be acceptable to the State ofRegistry.SAFA Coordination Section Page 120 of 217© European Aviation Safety Agency, 2012 V 2.0