SAFA Ramp Inspections - Code7700

SAFA Ramp Inspection ProceduresGuidance materialInspection Item Std. Cat. Std. ref. Standard’s Text Pre-described Finding PDF code Instructions for completingthe detailed descriptionA8-IIIB-8/.4 8.4 EvacuationThe aeroplane shall be equipped with sufficient emergencyexits to allow maximum opportunity for cabin evacuationwithin an appropriate time period. Items to be consideredshall include:a) number of seats and seating configuration;b) number, location and size of exits;c) marking of exits and provision of instructions for use;d) likely blockages of exits;e) operation of exits; andA8-IIIB-4.6.2-4f) positioning and weight of evacuation equipment at exits,e.g. slides and rafts.4.6.2 Facilities shall be provided for the rapid evacuation ofthe aeroplane in conditions likely to occur following anemergency landing. Such facilities shall be related to thepassenger and crew capacity of the aeroplane and shall beshown to be suitable for their intended purpose.4.6.3 The interior layout of the cabin and the position andnumber of emergency exits, including the means of locatingand illuminating the escape paths and exits, shall be such asto facilitate rapid evacuation of the aeroplane in conditionslikely to occur following an emergency landing.4.6.4 On aeroplanes certificated for ditching conditions,provisions shall be made in the design to give maximumpracticable assurance that safe evacuation from theaeroplane of passengers and crew can be executed in caseof ditching.B07 I 3 A8-IIIA-4.1.7 Ch. 4.1.7 - Emergency landing provisions4.1.7.2 Facilities shall be provided for the rapid evacuation ofthe aeroplane in conditions likely to occur following anNumber of passengers onboard exceeds themaximum allowed in caseof unserviceableB07-10 Indicate the particulars ofthe situation observedSAFA Coordination Section Page 148 of 217© European Aviation Safety Agency, 2012 V 2.0